Integrated slightly acidic electrolyzed water manufacturer

ZYWS pure water micro acid water integrated machine is a multifunctional water treatment equipmentIntegrating pure water and slightly acidic water, it converts tap water into pure water, sterile water, and slightly acidic electrolyzed water, with functions of pure water mode, daily mode, and disinfection mode, making it a versatile machine,At the same time, it can meet the needs of purified water for cleaning dental instruments, sterile water (antibacterial water) for dental chair diagnosis and treatment, disinfection water for comprehensive treatment table waterways, and disinfection water for oral instruments,It adopts an integrated structure with a built-in water tank, which only occupies an area of 2-3 square meters, and is particularly suitable for dental clinics with limited installation space.


Model

ZYWS-Q2-300RO

  ZYWS-Q4-600RO

RO pure water

300L/H(RO pure water

        600L/H(RO pure water

Slightly acidic water

240L/H(Daily mode

           480L/H(Daily mode

Slightly acidic water

 120L/H(Disinfection mode

       240L/H(Disinfection mode

Number of dental chairs supported

1-20

    1-40

Feed water

Tap water (TDS<400ppm),Water pressure 3.0~4.0kg/cm²,temperature10~30℃

Inlet water conductivity monitoring range 0~2000 uS/cm (online monitoring)

Pure water Flow rate

15~20L/min

Slightly acidic water flow rate

15~20L/min

RO pure water

Conductivity ≤ 15 uS/cm (online monitoring) Microparticles (≥0.2um) <1/ml

Ion removal rate: ≥ 99%, Recovery rate: ≥50~75%;

Slightly acidic water

Main bactericidal factor: hypochlorous acid

Available chlorine content: 3-10mg/L (daily mode)                                                        

Effective chlorine content: 40mg/L~80mg/L (disinfection mode)

pH value: 5.0 ~ 6.5     Oxidation reduction potential (ORP) ≥ 600 mV

 Pretreatment system

Standard configuration: MMF+ACF (built-in) Optional RH (built-in)

Size

                                          Width×Depth×Height1600mm*780mm*1700mm

weight

700~800kg (Full water status)

700~800kg (Full water status)

Power

220V 50HZ   3.0~4KW 

220V 50HZ   3.0~4KW 

RO pure water application

1. Cleaning of oral instruments, preparation of water for cleaning tank and cleaning solution;

2. Pulsating vacuum sterilization, ultrasonic cleaning machine, high pressure sterilization pot;

Slightly acidic water application

Daily mode:

1. Water for dental chair diagnosis and treatment (daily mode) Water for dental chairs of major brands such as Zhian, Yinhu, Kangda, Jiayou, Huasheng, Feimante, Sino, Boen, Kexiang, Yayou, Shengtian, Belmont, Kava, Castellini, etc.

Disinfection mode:

1. Disinfection of medical equipment and medical supplies;

2. Disinfection of water and water channels for dental comprehensive treatment tables;

3. Disinfection of skin and mucous membranes;

4. Disinfection of general object surfaces;

5. Disinfection of environmental ground surfaces;

Installation area

2-3 square meters

1、The pretreatment system has a fully automatic forward and reverse flushing self-cleaning function, which does not need to be frequently replaced and can remove impurities such as particulate matter, iron, manganese, residual chlorine, calcium, magnesium ions, etc. in the raw water;

2、The desalination rate of RO reverse osmosis membrane is as high as 99%, and it has automatic flushing function after startup and automatic pulse flushing function after water production ends. 

3、System startup self-check, automatic water production, automatic flushing, automatic shutdown when raw water is insufficient/water tank is full, high and low pressure protection, etc.;

4、Online 3-way water quality monitoring, online monitoring of raw water, pure water and electrolyte concentration, inlet water measurement range 0 ~ 2000uS/cm (conductivity), RO pure water measurement range 0 ~ 200uS/cm (conductivity), electrolyte concentration monitoring range 0 ~ 20mS/cm, with automatic water temperature compensation function to improve the accuracy of water quality monitoring;                                          

5、PLC control system is used to complete the automatic control and monitoring of electrical and instrument parts, 7-inch intelligent human-machine interface touch screen operation mode;

6、The touch screen monitors and displays real-time online parameters such as pH value, ORP value, effective chlorine content, electrolytic conductivity concentration, electrolytic current, cumulative flow, electrolytic cell service life, date, time, etc. The technical indicators of the disinfectant are monitored at any time, and an automatic alarm is issued if the disinfectant is unqualified.

7、The equipment has pure water mode, daily mode and disinfection mode, which can meet the needs of water for instrument cleaning, dental chair treatment and disinfection.




©2018 Sichuan Zhuoyue
Powered by:微行